Tracer 12V 40Ah  LiFePO4 Peli Case Kit

Professional power packs housed within a protective Peli™ Case. These battery packs are the portable solution, easy to carry and install. A robust IP65 Waterproof standard case has been pre wired. The batteries use prismatic cells that create the lightest weight construction. Supplied with fitted fuel gauge and charger.

Fuel Gauge

With an external fuel gauge you can check the power level remaining in the battery. A touch of the button shows how much energy remains and whether you need to recharge.

Neutrik Connections

Each Peli™ Case is equipped with two Neutrik connections, each offering up to 20A continuous output at ambient temperature up to 25°C. A combined output of 30A can be achieved if the two connectors are used with a Twin Neutrik Output Lead (TR8155). Please note - if both sockets are being used as output connections the total current must not exceed 30A.

LiFePO4 Battery Pack Fuel Gauge
LiFePO4 Battery Pack T-Bar Connector

As there are two connections, one can be used for output while the other can be used for charging, effectively making the battery an Uninterruptible Power Supply (UPS). Please note that when using as a UPS the output current must not exceed the charger’s current.

Waterproof

Tacer LiFePO4 battery packs are a totally sealed unit and waterproof to IP65 standard. 

Lightweight

IP Compliant Peli™ Cases

For more than 30 years Peli™ has built a reputation for manufacturing the toughest Protector Cases in the world. These high quality, protective cases offer safe transportation for fragile or expensive equipment and are the choice of professionals.

Connections

High Efficiency Charger

The 10A Charger (TR8206 included)
will charge your battery quickly.

For faster charge times, a rapid 20A charger (TR8212) is available. Please purchase separately.

Safety Features

Integrated Electronic ‘Battery Management System’ (BMS) provides the following protection:

  • Overcharge & over-discharge protection
  • Thermal protection
  • Over current protection
  • Short circuit protection

 

Protection

Flat Discharge

LiFePO4 technology gives a very flat discharge curve which means sustained power to the end of the cycle. If you are powering lights they will remain brighter for longer, giving you sustained performance.

Discharge Graph

Certified Safe

All Tracer LiFePO4 batteries conform to standard UN 38.3 which is the ONLY relevant safety standard for LiFePO4 batteries. Our battery packs have been through a rigorous testing procedure by UN certified inspectors. You should NEVER handle a non-certified LiFePO4 battery pack.

UN Certified Safe
12V 40Ah Battery Pack
Tracer Bespoke 12V 40Ah
Battery Pack & Peli Case
20A Fast Charger
Mains 10A Fast Charger
Neutrik Speakon to Bare Ends
Neutrik Speakon > Bare Ends (1m)
(TR8156)
9.8"
249 mm
11.8" / 300 mm
4.7" / 119 mm
12V 40Ah Specification Diagram
Type
Lithium Iron Phosphate (LiFePO4)
Voltage
12V
Capacity
40Ah
Charge Time
5 - 7 hrs
Charger
10A Charger
Life
1400+ Cycles
Dimensions (")
11.8 x 9.8 x 4.7 
Dimensions (mm)
300 x 249 x 119
Weight (oz)
211.6
Weight (grams)
6000
Watt-Hour (Wh)
480Wh
Max Continuous Discharge Current
30A
Max Peak Current (for 10mS)
60A
Nominal Voltage
12.8V
Discharge Cut-off Voltage
8V
Charging Voltage
14.6V
Temperature Range (charging)
0°C — 40°C
Temperature Range (discharging)
-10°C — 60°C
Self Discharge
<0.5% per day

NOT TO SCALE

THIS DRAWING IS COPYRIGHT AND IS ISSUED ON CONDITION THAT IT IS NOT COPIED, REPRODUCED
OR DISCLOSED TO THIRD PARTIES WITHOUT THE CONSENT IN WRITING OF DEBEN GROUP INDUSTRIES LTD.

Self-Discharge: ‹0.5% per day

We recommend a full charge at least every six months.

Protection

The battery pack is protected against over charge and discharge, there is also short circuit protection.

Guarantee

The battery pack and charger are guaranteed against manufacturing defect for 24 months from the date of purchase.

Your Basket0 items - £0.00