Tracer 12V 170Ah LiFePO4 Peli Case Kit

IP67 Waterproof PeliTM Case Kit using Amphenol circular MIL Spec connector system.

Professional power packs housed within a protective PeliTM Case. These battery packs are the portable solution, easy to carry and install.

A robust IP67 Waterproof standard case has been pre wired. Built using Amphenol Circular MIL Spec Connector system offering full IP67 protection. The batteries use prismatic cells that create the lightest weight construction. Supplied with built-in internal LED Fuel gauge and charger.

Key Features

  • PeliTM Case
  • Built-in internal LED Fuel gauge
  • Wired and ready to use
  • Two Amphenol sockets fitted to case
  • Longer lasting discharge
  • Faster recharge time
  • IP67 Waterproof standard
  • Up to 30A output, by using TR8185
  • Overcharge and short circuit protected
  • Temp. range (charging): 0°C – 40°C
  • Temp. range (discharging): – 10°C – 60°C
LiFePO4 Battery Pack T-Bar Connector

Fuel Gauge

With an internal fuel gauge you can check the power level remaining in the battery. A touch of the button shows how much energy remains and whether you need to recharge.

Internal cushioning protects the battery and its components ensuring you can deliver power in the most demanding of environments.

LiFePO4 Battery Pack Fuel Gauge

Two Amphnenol Connctions

Each Peli™ Case is equipped with two Amphenol connections, each offering up to 20A continuous output at ambient temperature up to 25°C. A combined output of 30A can be achieved if the two connectors are used with a Twin Amphenol Output Lead (TR8185). Please note - if both sockets are being used as output connections the total current must not exceed 30A.

As there are two connections, one can be used for output while the other can be used for charging, effectively making the battery an Uninterruptible Power Supply (UPS). Please note that when using as a UPS the output current must not exceed the charger’s current.

Portable power that is easy to carry and install.

Safety Features

Integrated Electronic ‘Battery Management System’ (BMS) provides the following protection:

  • Overcharge & over-discharge protection
  • Thermal protection
  • Over current protection
  • Short circuit protection
Approved
UN 38.3 Certified
RoHS Compliant

30 Amp Output Solution

If the output current required is greater than 20A use TR8185 to achieve up to 30A.

Bespoke Connections

Custom made adaptors available. We are able to offer almost any conceivable configuration, adaptor or connection for your battery pack.

Please contact us with your specific requirements: info@tracerpower.com

Please contact us for UN38.3 & CE Certificates

12V 170Ah Battery Pack
Tracer Bespoke 12V 170Ah
Battery Pack & Peli Case
20A Fast Charger
Mains 20A Ultra Fast Charger
Amphenol to Bare Ends
Amphenol > Bare Ends (1m)
(TR8186)
Type
Lithium Iron Phosphate (LiFePO4)
Nominal Voltage
12V
Capacity
170Ah
Charge Time
13 - 18 hrs
Charger
20A Charger
Life
1400+ Cycles
Dimensions (")
18.2 x 13.8 x 6.7
Dimensions (mm)
462 x 352 x 170
Weight (oz)
779.5
Weight (grams)
22100
Watt-Hour (Wh)
2040Wh
Max Continuous Discharge Current
30A
Max Peak Current (for 10mS)
60A
Actual Voltage
12.8V
Discharge Cut-off Voltage
8V
Charging Voltage
14V
Temperature Range (charging)
0°C — 40°C
Temperature Range (discharging)
-10°C — 60°C
Self Discharge
<0.5% per day

Self-Discharge: ‹0.5% per day

We recommend a full charge at least every six months.

Protection

The battery pack is protected against over charge and discharge, there is also short circuit protection.

Guarantee

The battery pack and charger are guaranteed against manufacturing defect for 24 months from the date of purchase.